Version 4.1
SHEET 1 1580 812
TEXT 352 72 Left 4 ;Instructions
TEXT 320 152 Left 2 ;in the toolbar click on the voltage source "V". move the mouse down and click,\nright click on the voltage source you have dropped on the sheet,\nin the window that opens click on advanced.\nin the window that opens click on pulse, (or sine if you want that sort of voltage)\nyou now have several fields to fill in,\nyou don't have to fill in the fields... "delay", or "no. of cycles".\nI have chosen... Vinitial=0, Von = 1, Trise=10n, Tfall=10n, Ton = 5u, Tperiod=10u\nclick on okay\nnow click on the downward pointing arrow in the toolbar, and drop it on the sheet below the voltage source.\nthis is the earth symbol, you need an earth symbol connected or the simulation won't run.\nnow click on the squiggly line (resistor) symbol in the toolbar, and drop it on the sheet below,\nyou may also wish to use the rotate symbol towards the right of the toolbar to rotate the resistor symbol.\nnow click on the capacitor symbol in the toolbar, and drop it on the sheet below,\nnow click on the blue wire in the middle of the toolbar, this is the wiring up mode.\nconnect up the components.\nright click on the resistor, and in the window that opens give it a value.\nright click on the capacitor, and in the window that opens give it a value.\nclick on the ",ac" icon in the toolbar, in the window that opens analysis at the top should be transient,\nset stop time to 100u, click okay.\nin the toolbar click on "net", in the opening window set the net name Vin, click on okay,\nplace this net name on the wire at the input.\ndo the same for Vout.\nClick on run.... the cct should simulate taking more or less no time at all.\nclick on the net names Vin and Vout to plot their waveforms.